Key words: wspro, hivel2d, feswms, rma2, rma4, sed2d, software, models, modelling, FESWMS, SED2D, RMA2, RMA4, modeling, software, model - Key words: wspro, hivel2d, feswms, rma2, rma4, sed2d, software, models, modelling, FESWMS, SED2D, RMA2, RMA4, modeling, software, model
SMS - Interface for FESWMS, RMA2, RMA4, and SED2D!
SMS - Interface for WSPRO, HIVEL2D, FESWMS, RMA2, RMA4, and SED2D provides a graphical interface for the FESWMS, RMA2, RMA4 and SED2D models.
SSG has the lowest prices for SMS - Interface for WSPRO, HIVEL2D, FESWMS, RMA2, RMA4, and SED2D!
SMS Surface Water Modeling System is a Windows graphical pre and postprocessor for hydrodynamic modeling. It includes interfaces for the two-dimensional finite-element analysis packages, RMA2, SED2D (U.S. Army Corps of Engineers TABS-MD), and FESWMS (Federal Highway Administration).
SMS Surface Water Modeling System Hydrodynamic Analysis
With a mesh constructed using SMS, the FESWMS or RMA2 software is used to compute flow velocities and water-surface elevations at each mesh node, and the boundary between wet and dry regions in the model. Flow
separations and eddy currents are accurately modeled. Both steady state and transient solutions can be computed. From a flow solution, the RMA4 software can model contaminant transport and the SED2D code can model sediment
transport.
SMS Surface Water Modeling System RMA2
SMS includes a model specific interface for the hydrodynamic analysis model RMA2. With a mesh constructed using SMS, RMA2 computes flow velocities and water-surface elevations at each mesh node. It also computes the dynamic
boundary between wet and dry regions in the model. Flow separations and eddy currents are accurately modeled. Both steady state and transient solutions can be computed. RMA2 is part of the TABS modeling system. It has been used
extensively by the Army Corps of Engineers and their consultants. It supports multiple methods of handling wetting and drying situations and its output can be used by RMA4 and SED2D to model contaminant migration and sediment
transport problems.
SMS Surface Water Modeling System SED2D
SED2D includes an interface to the newly rewritten and modernized SED2D-WES sediment transport model. SED2D-WES replaces a previous model, STUDH, which was part of TABS-MD suite of software. SED2D-WES can be
applied to clay or sand bed sediments where flow velocities can be considered two-dimensional in the horizontal plane. It
is useful for both deposition and erosion studies and, to a limited extent, for stream width studies. The program treats two
categories of sediment: noncohesive, which is referred to as sand, and cohesive which is referred to as clay. The program
utilizes the water-surface elevations and velocities generated by RMA2, and new bathymetry is output for iterative runs of RMA2 if significant scour or deposition occur.
SMS Surface Water Modeling System FESWMS
SMS includes an interface for the hydrodynamic analysis model FESWMS. This model, developed for the Federal Highway Administration, produces hydrodynamic solutions similar to RMA2. The modeling system can be used to
simulate flow in water bodies that have irregular topography and geometrical features such as islands and highway embankments. Flow over dams, weirs, and highway embankments, and through bridges, culverts, and gated openings
can also be modeled. FESWMS can be used to model both sub- and super-critical flow conditions.
SMS Surface Water Modeling System Postprocessing
After the results are computed by one of the analytical models, the solution can be viewed graphically in SMS. Numerous
options are available for changing the display of the solution. Results also include an animation and flow visualization
algorithm. In addition, time-history plots can be generated for selected nodes to illustrate fluctuations in velocity and water-surface elevation.
For all your modeling needs, SMS Surface Water Modeling System with the WSPRO, HIVEL2D, FESWMS, RMA2, RMA4, and SED2D interfaces is the model of choice!
Universities - 50% Discount
Enter the Scientific Software Group World Wide Web Site to view our catalog of over 100 Groundwater, Surface Water, Geology, and other Environmental Software Products. E-mail tech@gwsoftware.com for a free copy of our product catalog.
For additional information on SMS - Interface for WSPRO, HIVEL2D, FESWMS, RMA2, RMA4, and SED2D , contact:
Scientific Software Group
Interface for wspro, hivel2d, feswms, rma2, rma4, and sed2d
e-mail: tech@gwsoftware.com
http://www.scisoftware.com
